Want plates that are going to look great forever? Check out Urethane Coated Iron Plates – cheaper than full urethane, but should look really good for a long time.
Iron plates are made of almost pure iron that provides superior durability and precise weight measurements for a reasonably low cost. There are different plate coatings used in plates to make them durable, and one of the best coatings is urethane. Urethane coating is extremely impact-resistant and twice as durable as rubber coating.
Rogue 12-Sided Urethane Grip Plate from Rogue:
Urethane Coated Iron Plates – Overview
Iron plates are the traditional weight plates most typically seen in non-specialized gyms. They are made by pouring molten iron into a circular mold or cast and become a hardened weight plate when the iron cools. Iron plates usually are silver or black in appearance but can also occur in a reddish-brownish color because of rust. Compared to bumper plates, iron plates increase in diameter and thickness as they get heavier.
Urethane-coated iron plates resist weather, sunlight, and other elements and resist cuts and tears better than traditional rubber plates. They are not designed to be dropped but allow you to load a barbell with a higher overall max weight. Here are different iron plates from trusted fitness brands offering urethane coating.
Rogue 12-Sided Urethane Grip Plate
The edged circumference of the 12-Sided Urethane Grip Plates significantly reduces the movement on the ground, even on rough surfaces. These plates also have a solid cast-iron core and impact-resistant polyurethane coating. The re-engineered ledge grip design (on the 25 LB and above) presents tapered, hollowed handle cut-outs on both sides. This enables a quick grab and pick-up from the middle of the plate, no matter which side is facing out, instead of having to reach your fingers under the plate’s sides when it’s flat on the ground.
The Rogue 12-Sided Urethane Grip Plates have a black matte finish and white Rogue branding and tolerance of +/- 1% for the 25 LB and up and +/- 3% for the smaller change plates. They have a 3mm minimum thickness on the protective urethane coating and include a 50.6mm collar opening with a solid cast iron core for reliable structural integrity.
Urethane Coated Equalizer Plates
The Urethane Coated Equalizer Plates are REP’s best, high-quality iron plates with premium, commercial-grade urethane coating. This ultra-durable, odor-free coating is highly impact-resistant and shock-absorbent, protects your equipment, and helps minimize noise. These plates fit all standard, 2” barbells and have a 3% weight tolerance.
The cast iron plates highlight an aesthetic and practical design, with six precision-cut, balanced grip holes that make the plates easy to operate and allow you to use separate plates in exercises. They also have a neat, embossed logo and weight markings with white inlay, and these equalizers are the most beautiful, urethane-encased plates available.
American Barbell Urethane Olympic Plates
The American Barbell Urethane Olympic Plates utilize premium German urethane that provides the highest level of resilience and durability and will last a lifetime. They feature an innovative plate design to handle the most challenging training settings. The four-hole grips enable easy loading onto the bar, and they are safer and more comfortable to carry than any other plate design.
The American Barbell Urethane Olympic plates are slip-resistant and grip-friendly, and the plate widths range from 0.95” on the 2.5lb plate to 1.64” on the 45lb plate. The stainless-steel hub ensures that the plate fits sleekly and snugly on and off the bar, while the solid cast iron core delivers an accurate weight that you can depend on. These plates have a three-year warranty and are not warranted or made for dropping.
Urethane Coated Iron Plates – In Summary
That’s our close-up look at the Urethane Coated Iron Plates.
Iron plates are durable with precise weight measurements, and with the addition of urethane coating, they become highly impact-resistant and more durable than rubber coating. They are odorless, have a much more dead bounce, and give the plates a beautiful appearance. They are not meant to be dropped, but you can still do several exercises like presses, deadlifts, rows, and more.
Looking for more options? Check out these other great products:
Speaking of good looks – Rep Fitness has these WILD Animal Print Bumper Plates.
But it doesn’t end there – there’s also a collection of Stylish Bumper Plates available from a number of vendors.
More products from Rogue Fitness.
Photo Credits
Product photos on this page are property of Rogue Fitness.
This website is not affiliated or associated with CrossFit, Inc. CrossFit is a registered trademark of CrossFit, Inc.
Affiliate Disclaimer
We are an affiliate of Rogue Fitness and others that sell this training gear. If you buy clothing or other training gear after clicking the links in this article, we receive a small commission at no extra cost to you. This helps us to bring you in-depth information and content on these great training products.
